CO2 COMPRESSOR STATIONS CO2 LAMELLAE CO2 AUTOMATION
Here you can find a large selection of different SCM Frigo CO2 compressor stations for deep freezers, normal freezers and as a Booster solution. Small CO2 units (CO2 transcritical units) operate with a compressor controlled by a BLDC frequency converter. They are compact, easy and quick to install and can be connected to a data network. Cooling capacities start at 0.6 kW for standard products and reach 1.5 MW. On special order, the factory manufactures even larger models, according to the customer's request. Additional options can be ordered for most of the devices, of which the heat storage module is one of the most used. Why throw already collected energy into the surrounding environment when it can be used very efficiently either for heating the building, heating domestic water or heating the ventilation air. The mentioned three methods are the most used ones, but there are probably still more ways to reuse.
CO2 Condensing Units
There are two model series in the CUBO2 Smart product family - one for the freezer (LT) and the other for the refrigeration (MT). In the CUBO2 Plus product family, the options are larger and so is the power range. The CUBO2 Aqua product family offers devices where the gas cooler/condenser of the unit runs on water/glycol.
Cooling Capacity:
MT from 0,6 kW up to 8,5 kW
LT from 0,65 kW up to 6,6 kW
REQUEST A QUOTE
CUBO2 Smart is an high efficiency condensing unit (for CO2 transcritical application) equipped with BLDC variable speed compressor. It is compact, easy to install and can directly communicate with the refrigerated units. Thanks to these features it is a very efficient (even at partial load) without any compromise with the food conservation.
Cooling Capacity:
MT from 4,6 kW up to 34 kW
LT from 1,1 kW up to 12,5 kW
REQUEST A QUOTE
Design is compact and units are easy to install and maintain. Units are equipped with gas cooler and electrical panel, tested and factory programmed for an easy start-up.
Cooling Capacity:
MT from 0,6 kW up to 8,5 kW
LT from 0,65 kW up to 6,6 kW
REQUEST A QUOTE
CUBO2 AQUA is an high efficiency condensing unit (for CO2 transcritical application) equipped with BLDC variable speed compressor. It is compact, easy to install and can directly communicate with the refrigerated units. Thanks to these features it is a very efficient (even at partial load) without any compromise with the food conservation.
CO2 Transcritical Racks Commercial
According to SCM Natural Choice, SCM Frigo has developed a range of CO2 transcritical racks with a very low carbon footprint and lower energy consumption than the traditional HFC solutions.
Cooling Capacity:
MT 12 kW up to 57 kW @ -8°C (50 Hz) | Tout. GC = 35°C
LT 3 kW up to 16 kW @ -30°C (50 Hz)
Design is compact and units are easy to install and maintain. Units are equipped with electrical panel, tested and factory programmed for an easy start-up.
SMART BOOSTER SCROLL TECH
Cooling Capacity:
LT 1 kW up to 15 kW @ -33°C / -8°C / 40 bar liquid
Low operating costs in all climates due to vapor injection technology. Design is compact and units are easy to install and maintain. Units are equipped with electrical panel, tested and factory programmed for an easy start-up.
Cooling Capacity:
MT up to 150 kW
LT up to 50 kW
REQUEST A QUOTE
The Lean line product family includes CO2 devices for different cooling capacities, which work either in the MT line or as a Booster solution in the MT/LT line. Extended configuration to control up to 4 MT/LT compressors and up to 3 LT compressors. Easy access to components from one side (possibility of mounting the device against the wall). Available for indoor use or as a "plug'n cool" version with an integrated gas cooler.
This solution is ideal for outdoor installation when there is no space for the cooling system at the installation location. For example, the WALK IN device can be placed near the outside wall of the store and the cooling pipe can be routed from there to the sales hall. The outer casing of this solution protects the compressor and other components of the unit from bad weather conditions. Unit is completely maintainable from inside.
Closed frame made of thick galvanized sheet, additionally protected with a coat of oven-baked polyester-based thermosetting paint. Stainless steel screws and bolts. RAL 9006.
REQUEST A QUOTE